Question 43 (Textile Engineering & Fibre Science)
| Group – I | Group – II |
| P. Crackers in the yarn | 1. Excessive short fibres in mixing |
| Q. High yarn hairiness | 2. High lap weight CV% |
| R. High count variation within bobbin | 3. Wider front zone setting on ring frame |
| S. High yarn unevenness | 4. Too close front zone setting on ring frame |
| 5. Incorrect bobbin diameter | |
| 6. Roller slippage on draw frame |
| (A) | P-4, Q-3, R-2, S-5 |
| (B) | P-4, Q-1, R-6, S-3 |
| (C) | P-3, Q-5, R-2, S-6 |
| (D) | P-3, Q-1, R-4, S-6 |
[Show Answer]
Option D is correct.